This instrument is a slicing instrument designed for a wide range of duties, characterised by its segmented blade that permits for straightforward snapping off of lifeless segments to disclose a recent, sharp edge. Its building incorporates a sturdy deal with, typically with an ergonomic design, to reinforce grip and management throughout use. The mannequin designation specifies specific options reminiscent of blade width, total dimensions, and the producer’s designation for a selected product line recognized for its sturdiness and efficiency.
The utility of this kind of instrument lies in its capability to take care of a constantly sharp slicing floor with out the necessity for sharpening. This characteristic reduces downtime and enhances effectivity throughout a spread of functions, from building and DIY tasks to common function slicing duties. Its improvement displays an evolution in slicing instrument design, prioritizing consumer comfort, security, and longevity. The particular mannequin typically represents developments in supplies and building strategies, bettering its resistance to put on and tear in demanding environments.
The next sections will element the elements, functionalities, and functions of this kind of instrument, offering a complete overview of its options and its position throughout numerous industries.
1. Blade segmentation
Blade segmentation is a defining attribute of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This design characteristic immediately influences the instrument’s usability, upkeep, and total lifespan, contributing considerably to its attraction in each skilled and DIY functions.
-
Constant Sharpness
The segmented blade design permits the consumer to show a recent, sharp innovative by snapping off a uninteresting section. This eliminates the necessity for sharpening, sustaining constant slicing efficiency all through the blade’s lifespan. As an illustration, when slicing by drywall or cardboard, the preliminary section could turn into blunt; snapping it off instantly restores optimum slicing functionality.
-
Blade Economic system and Longevity
The segmented design successfully extends the lifetime of the blade. As an alternative of discarding a blade when it turns into uninteresting in a single space, solely the worn section is eliminated, maximizing the utility of all the blade. This design side will increase the product’s worth proposition by lowering the frequency of blade replacements. Utilizing the total potential of the blade reduces waste and creates price effectivity.
-
Security Concerns
Whereas blade segmentation offers benefits, it additionally introduces particular security issues. The act of snapping off a section requires cautious execution to stop harm. The uncovered blade edge after snapping might be notably sharp and requires warning. The design of the snap-off mechanism itself should be sturdy to make sure the blade breaks cleanly and predictably. Poor-quality instruments with unreliable snap-off mechanisms can pose a security hazard.
-
Materials Composition and Manufacturing
The effectiveness of blade segmentation is contingent upon the fabric composition and manufacturing technique of the blade. Excessive-quality metal and exact segmentation are important for clear, predictable breaks. The particular metal used within the Stanley 10-817 25mm FatMax Xtreme is chosen for its capability to take care of sharpness and snap cleanly alongside the pre-scored traces.
In abstract, blade segmentation is integral to the design and performance of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This design impacts the instrument’s usability, upkeep necessities, security issues, and total financial worth. These elements collectively affect its widespread adoption throughout numerous consumer teams.
2. Ergonomic deal with
The ergonomic deal with of the Stanley 10-817 25mm FatMax Xtreme snap-off knife represents a vital design aspect that immediately impacts consumer expertise, security, and effectivity. Its significance stems from the extended and infrequently repetitive nature of duties for which such instruments are employed. A poorly designed deal with can result in discomfort, hand fatigue, and an elevated danger of harm, whereas an ergonomically sound design mitigates these dangers, permitting for prolonged use and enhanced precision. The FatMax Xtreme collection, particularly, emphasizes a deal with designed for a safe and cozy grip, even beneath demanding situations.
The form, materials, and floor texture of the deal with all contribute to its ergonomic properties. Contoured grips that conform to the pure form of the hand scale back pressure on particular stress factors. Overmolded supplies, reminiscent of rubber or textured polymers, improve grip and forestall slippage, notably in moist or oily situations. The deal with’s measurement can also be important; it should be massive sufficient to offer sufficient buy however not so massive as to trigger hand fatigue. As an illustration, tradespeople ceaselessly use these knives for slicing supplies like drywall, flooring, and roofing felt. An ergonomic deal with permits them to carry out these duties for prolonged intervals with out growing hand or wrist ache, which interprets to elevated productiveness and lowered danger of work-related accidents.
In conclusion, the ergonomic deal with of the Stanley 10-817 25mm FatMax Xtreme is just not merely an aesthetic characteristic however a vital part that contributes on to consumer well-being and operational effectiveness. By lowering pressure and enhancing grip, the ergonomic design permits for safer, extra comfy, and extra productive use of the instrument. This design consideration underscores the significance of contemplating human elements in instrument design, notably in skilled settings the place repetitive duties are frequent.
3. Blade Width (25mm)
The 25mm blade width of the Stanley 10-817 FatMax Xtreme snap-off knife is a key specification figuring out its utility throughout varied functions. This dimension is just not arbitrary; it’s intentionally chosen to steadiness slicing capability, blade sturdiness, and precision, influencing the kind of supplies that may be successfully processed and the general efficiency of the instrument.
-
Slicing Capability and Materials Suitability
The 25mm blade width offers a considerable innovative, enabling the instrument to effectively slice by thicker supplies in comparison with narrower blade options. This width is appropriate for slicing duties involving drywall, cardboard, leather-based, and a few varieties of plastic. The broader blade additionally distributes power throughout a bigger space, lowering the chance of blade breakage when encountering resistance. Nonetheless, the elevated width could restrict the instrument’s maneuverability in tight areas or when performing intricate cuts that require finer management. For instance, whereas it excels at scoring drywall, it will not be the optimum selection for delicate crafting duties.
-
Blade Stability and Sturdiness
A wider blade inherently provides better stability throughout slicing operations. The elevated floor space offers enhanced resistance to bending and deflection, leading to straighter and extra managed cuts. That is notably related when slicing supplies that are inclined to shift or buckle beneath stress. The 25mm width additionally contributes to the blade’s total sturdiness, as it may well stand up to better stress earlier than fracturing or dulling. The Stanley FatMax Xtreme collection, specifically, is engineered for heavy-duty use, and the 25mm blade width enhances this design philosophy by making certain the blade can endure the trials of demanding jobsite situations.
-
Power Utility and Ergonomics
The blade width immediately influences the quantity of power required to provoke and keep a lower. A wider blade necessitates better power to penetrate the fabric, particularly if the blade is just not exceptionally sharp. This could have ergonomic implications, as customers could must exert extra effort, doubtlessly resulting in fatigue over extended use. Subsequently, the deal with design and total ergonomics of the Stanley 10-817 are essential for mitigating these results, permitting customers to comfortably apply the required power with out undue pressure.
-
Relationship to Snap-Off Segmentation
The 25mm blade width works in live performance with the snap-off segmentation design. This width offers ample materials for a number of segments, every providing a recent innovative as wanted. The segmentation intervals are designed to optimize using the blade materials whereas sustaining adequate structural integrity for every section. The 25mm width permits for a steadiness between the variety of segments and the sturdiness of every section, contributing to the general longevity and worth of the blade. The effectivity of the snap-off mechanism is important to completely understand the advantages of this design.
In summation, the 25mm blade width is a defining attribute of the Stanley 10-817 FatMax Xtreme snap-off knife, influencing its slicing capability, sturdiness, ergonomics, and the effectiveness of its snap-off segmentation. This dimension is rigorously thought of to optimize the instrument’s efficiency throughout a broad vary of functions, solidifying its place as a flexible and dependable slicing instrument.
4. Sturdiness
Sturdiness is a paramount consideration within the design and choice of any slicing instrument, and it performs a very vital position in evaluating the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This attribute dictates the instrument’s lifespan, its capability to resist demanding work environments, and its total worth proposition. The “FatMax Xtreme” designation itself suggests an emphasis on robustness and longevity.
-
Materials Composition and Development
The sturdiness of the Stanley 10-817 stems from the supplies utilized in its building. Excessive-carbon metal is commonly employed for the blade to offer a steadiness of hardness and toughness, resisting put on and fracture. The deal with sometimes incorporates impact-resistant polymers or composite supplies designed to resist drops, impacts, and publicity to harsh chemical compounds or solvents. The standard of the supplies and the precision of the manufacturing processes immediately have an effect on the instrument’s capability to endure extended use and hostile situations. As an illustration, a building employee utilizing the knife day by day on a job web site requires a instrument able to withstanding fixed abrasion and potential unintended impacts.
-
Blade Section Integrity and Break Resistance
The snap-off design necessitates a blade with rigorously engineered segmentation. The integrity of those segments and their resistance to untimely breakage are essential for sturdiness. A blade that snaps prematurely or fails to interrupt cleanly compromises security and reduces the instrument’s usability. The design and manufacturing processes should guarantee constant and predictable breaking factors whereas sustaining the energy of every section. When slicing thick cardboard or a number of layers of fabric, a blade with weak segments would rapidly turn into unusable, highlighting the significance of section integrity.
-
Deal with Ergonomics and Structural Integrity
Whereas the ergonomic design of the deal with contributes to consumer consolation, it additionally impacts the instrument’s total sturdiness. A deal with that’s poorly hooked up or liable to cracking beneath stress will render the instrument unusable, whatever the blade’s situation. The deal with should be securely mounted to the blade housing and able to withstanding vital power with out deformation or failure. Tradespeople making use of substantial stress to the knife whereas slicing by dense supplies require a deal with that maintains its structural integrity, stopping slippage or breakage.
-
Corrosion Resistance
Publicity to moisture and corrosive substances can considerably degrade the sturdiness of a slicing instrument. The Stanley 10-817 typically incorporates coatings or finishes on the blade and deal with to reinforce corrosion resistance. That is notably necessary in environments the place the instrument could also be uncovered to humidity, saltwater, or chemical compounds. A knife utilized in plumbing or marine functions, for instance, requires enhanced corrosion resistance to stop rust and keep its performance over time.
The sides of fabric composition, blade section integrity, deal with building, and corrosion resistance collectively decide the general sturdiness of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. These elements are interconnected, and a weak spot in anybody space can compromise the instrument’s lifespan and efficiency. The “FatMax Xtreme” designation displays a deliberate engineering effort to maximise these elements, making a instrument that may stand up to the calls for {of professional} use and supply long-term worth.
5. Snap-off Mechanism
The snap-off mechanism is a defining attribute of the Stanley 10-817 25mm FatMax Xtreme snap-off knife, immediately influencing its performance and consumer expertise. This mechanism allows the consumer to show a recent, sharp innovative by breaking off a uninteresting section of the blade, thereby eliminating the necessity for sharpening and increasing the blade’s usable life.
-
Mechanism Elements and Operation
The snap-off mechanism sometimes includes a slider or push-button that advances the blade, a locking mechanism to safe the blade on the desired extension, and pre-scored segments alongside the blade’s size. To reveal a brand new innovative, the consumer extends the blade, aligns the uninteresting section with a delegated breaking level, and applies stress to snap it off, typically utilizing a built-in breaker or pliers. The effectiveness of this mechanism relies on the precision of the blade segmentation and the reliability of the slider and locking elements. A malfunctioning locking mechanism can result in blade slippage, posing a security hazard.
-
Security Options and Concerns
The design of the snap-off mechanism incorporates security options to attenuate the chance of harm. These options embrace a sturdy locking mechanism to stop unintended blade retraction, a contoured deal with for safe grip, and generally, a blade snapper to soundly break off uninteresting segments. Nonetheless, the consumer should train warning when snapping off blade segments to keep away from cuts or flying particles. Correct coaching and adherence to security tips are important for the secure and efficient use of this mechanism. The mechanism’s reliability contributes to the general security profile, the place a poorly designed mechanism may trigger unpredictable blade snapping.
-
Materials Composition and Sturdiness of the Mechanism
The supplies used within the snap-off mechanism’s building considerably impression its sturdiness and longevity. Excessive-quality steel or bolstered polymers are sometimes employed to resist the repeated stress of blade extension, retraction, and locking. The mechanism’s resistance to put on and tear immediately impacts the instrument’s lifespan and its capability to take care of constant efficiency over time. The Stanley 10-817 FatMax Xtreme, with its emphasis on sturdiness, sometimes incorporates sturdy supplies in its snap-off mechanism to make sure dependable operation beneath demanding situations. An inexpensive mechanism results in speedy put on, making the general instrument ineffective.
-
Upkeep and Substitute
The snap-off mechanism requires minimal upkeep, sometimes involving occasional cleansing to take away particles that would impede its operation. Nonetheless, the mechanism’s elements are topic to put on and tear, and finally, alternative could also be vital. The provision of alternative components and the convenience of disassembly and reassembly are elements that affect the instrument’s long-term worth. A well-designed mechanism permits for straightforward blade alternative and, in some instances, component-level repairs, extending the instrument’s service life. The complexity of the mechanism can deter customers from trying repairs, emphasizing the worth of a sturdy, long-lasting design.
In conclusion, the snap-off mechanism is an integral part of the Stanley 10-817 25mm FatMax Xtreme snap-off knife, immediately impacting its usability, security, and longevity. The design, supplies, and operation of this mechanism are important issues in evaluating the instrument’s total efficiency and suitability for varied slicing duties. The mechanism’s reliability, mixed with correct consumer method, allows environment friendly and secure use of the instrument.
6. FatMax Xtreme Sequence
The “FatMax Xtreme Sequence” represents a product line from Stanley recognized for enhanced sturdiness and efficiency traits. The “Stanley 10-817 25mm FatMax Xtreme snap-off knife” is a selected product inside this collection, inheriting the collection’ design ideas and materials decisions meant to offer superior resilience in demanding functions. The collection designation signifies the knife is engineered to resist harsher situations and extra frequent use in comparison with normal Stanley choices. As an illustration, the deal with materials could also be upgraded to resist increased impression forces, or the blade locking mechanism could also be bolstered to withstand put on. This affiliation results in an expectation of better reliability and prolonged lifespan for the knife. The mixing of “FatMax Xtreme Sequence” elements within the “Stanley 10-817 25mm FatMax Xtreme snap-off knife” creates a product designed for skilled use.
A sensible consequence of this connection is the knife’s suitability to be used in building, industrial, or different demanding environments. Professionals reminiscent of electricians, plumbers, and carpenters typically require instruments able to withstanding day by day use and potential publicity to harsh situations. The “FatMax Xtreme Sequence” designation indicators to those customers that the knife is designed to fulfill these necessities. The improved sturdiness traits present a level of confidence, doubtlessly lowering the frequency of replacements and minimizing downtime attributable to instrument failure. A business building crew, for instance, may select the 10-817 attributable to its popularity throughout the FatMax Xtreme lineup, resulting in fewer interruptions brought on by instrument malfunction.
In abstract, the “FatMax Xtreme Sequence” designation is a important part of the “Stanley 10-817 25mm FatMax Xtreme snap-off knife,” influencing materials choice, design options, and total efficiency expectations. The connection implies a deal with enhanced sturdiness and suitability for demanding functions, translating to tangible advantages for skilled customers. Though challenges associated to instrument upkeep and acceptable utilization stay, the affiliation with the “FatMax Xtreme Sequence” offers a stage of assurance relating to the knife’s capability to resist rigorous use.
7. Mannequin Identification (10-817)
The mannequin identification code “10-817” serves as a singular identifier for a selected configuration of the Stanley 25mm FatMax Xtreme snap-off knife. This code is essential for distinguishing this specific instrument from different comparable fashions throughout the Stanley product line and for precisely referencing its specs, alternative components, and associated documentation.
-
Specification Precision
The “10-817” designation ensures that customers and retailers can exactly determine the instrument’s traits, together with blade width, deal with design, and particular options throughout the FatMax Xtreme collection. For instance, a components provider can use this code to substantiate {that a} alternative blade is appropriate with the meant instrument, stopping errors in ordering and making certain correct performance. The shortage of a exact identifier may result in the choice of incompatible elements, affecting efficiency and security.
-
Guarantee and Assist
The mannequin quantity is important for guarantee claims and buyer help inquiries. Stanley and its licensed service suppliers use this code to confirm the instrument’s authenticity and decide the applicability of guarantee protection. The absence of a legitimate mannequin quantity or an try to say guarantee on a counterfeit product would probably lead to denial of service. This code safeguards each the producer and the patron towards fraudulent actions.
-
Stock Administration and Logistics
Retailers and distributors depend on the “10-817” designation for environment friendly stock administration and logistics. This code allows correct monitoring of inventory ranges, streamlined order processing, and correct categorization of the instrument inside product catalogs. Using standardized mannequin numbers reduces the chance of delivery errors and ensures that clients obtain the proper product. An inaccurate or lacking mannequin quantity may disrupt provide chains and result in buyer dissatisfaction.
-
Product Documentation and Security Info
The “10-817” identifier is immediately linked to particular product documentation, together with consumer manuals, security directions, and technical specs. This documentation offers customers with important info on the correct use, upkeep, and potential hazards related to the instrument. Entry to correct documentation is important for making certain secure operation and maximizing the instrument’s lifespan. With no particular mannequin quantity, finding and referencing the proper documentation could be considerably tougher, doubtlessly growing the chance of accidents or improper dealing with.
In conclusion, the mannequin identification code “10-817” is an indispensable aspect of the Stanley 25mm FatMax Xtreme snap-off knife. It facilitates exact specification, guarantee help, environment friendly stock administration, and entry to essential product documentation, contributing to the general reliability and worth of the instrument. This identifier is just not merely an arbitrary quantity however a key part of the product’s identification and its integration throughout the broader Stanley ecosystem.
Continuously Requested Questions
This part addresses frequent inquiries and issues relating to the Stanley 10-817 25mm FatMax Xtreme snap-off knife, offering readability on its options, utilization, and upkeep.
Query 1: What distinguishes the FatMax Xtreme collection from different Stanley snap-off knives?
The FatMax Xtreme collection emphasizes enhanced sturdiness and robustness in comparison with normal Stanley knives. This sometimes interprets to stronger supplies within the deal with building, a safer blade locking mechanism, and an total design meant to resist rigorous use and demanding work environments. The particular enhancements current within the 10-817 mannequin are aligned with this core precept.
Query 2: How does one safely get rid of snapped-off blade segments?
Snapped-off blade segments pose a laceration hazard and should be disposed of responsibly. The advisable observe entails amassing the segments in a puncture-resistant container, reminiscent of a heavy-duty plastic bottle or a delegated sharps container. This container ought to be clearly labeled to point its contents and disposed of in accordance with native rules for sharp waste disposal.
Query 3: What kind of blade alternative is advisable for the 10-817 mannequin?
The Stanley 10-817 25mm FatMax Xtreme snap-off knife is designed to just accept 25mm snap-off alternative blades. It’s advisable to make use of real Stanley alternative blades or these particularly advisable by Stanley for optimum efficiency and security. Utilizing non-compatible blades could compromise the knife’s performance and improve the chance of accidents.
Query 4: What upkeep is required to make sure the longevity of this instrument?
Minimal upkeep is required for the Stanley 10-817. Common cleansing to take away collected particles from the blade slider and locking mechanism is advisable. A dry material is usually adequate; keep away from utilizing extreme lubricants, as they’ll entice dust and hinder the mechanism’s operation. Inspecting the blade locking mechanism periodically for indicators of damage or harm can also be advisable.
Query 5: What are the first security precautions to watch when utilizing a snap-off knife?
Security precautions embrace at all times retracting the blade absolutely when not in use, utilizing acceptable private protecting gear reminiscent of gloves and eye safety, and snapping off blade segments rigorously and away from oneself and others. By no means apply extreme power when slicing, and at all times make sure the workpiece is securely supported. A pointy blade is safer than a uninteresting blade, as much less power is required.
Query 6: Can the blade locking mechanism be adjusted or tightened if it turns into unfastened?
The blade locking mechanism within the Stanley 10-817 is usually not designed for consumer adjustment. If the locking mechanism turns into unfastened or fails to securely maintain the blade, it might point out put on or harm. In such instances, the instrument ought to be inspected by a professional technician or changed to keep away from potential security hazards. Making an attempt unauthorized repairs could void the guarantee and compromise the instrument’s integrity.
In essence, accountable use, correct disposal, and adherence to security tips are paramount when working the Stanley 10-817 25mm FatMax Xtreme snap-off knife.
The next part will elaborate on sensible functions of the Stanley 10-817 25mm FatMax Xtreme snap-off knife.
Optimizing Utility
To maximise the efficiency and lifespan of this instrument, adherence to particular tips is advisable. The next suggestions promote secure and environment friendly operation.
Tip 1: Choose Applicable Blade Extension. Lengthen the blade solely to the minimal size required for the duty at hand. Extreme extension will increase the chance of blade breakage and compromises slicing precision. Make sure the locking mechanism is absolutely engaged earlier than making use of stress.
Tip 2: Make use of Appropriate Slicing Angle. Preserve a shallow slicing angle to attenuate stress on the blade. Keep away from twisting or bending the blade throughout use, as this will result in untimely put on or fracture. Use a managed, deliberate movement.
Tip 3: Make the most of Applicable Slicing Floor. Make use of an appropriate slicing floor, reminiscent of a self-healing mat or a chunk of scrap materials. Keep away from slicing immediately on exhausting surfaces like concrete or steel, as this dulls the blade quickly and will increase the chance of slippage.
Tip 4: Preserve Cleanliness. Frequently clear the blade and the interior mechanism to take away collected particles. Use a dry material to wipe down the instrument after every use. Keep away from utilizing solvents or lubricants that would degrade the plastic elements.
Tip 5: Get rid of Blade Segments Responsibly. Acquire snapped-off blade segments in a puncture-resistant container. Securely seal the container and get rid of it in accordance with native rules for sharps waste. By no means discard unfastened blade segments basically trash receptacles.
Tip 6: Retailer the Knife Safely. When not in use, absolutely retract the blade and have interaction the locking mechanism. Retailer the knife in a delegated location away from kids and unauthorized customers. Think about using a instrument pouch or holster for secure transport.
Tip 7: Substitute Blades Promptly. Substitute the blade when it turns into uninteresting or broken. Making an attempt to power a uninteresting blade will increase the chance of slippage and harm. Use solely real Stanley alternative blades or these particularly advisable for the 10-817 mannequin.
Adhering to those tips extends the service lifetime of the knife, and enhances consumer security. Correct dealing with and storage are important.
This concludes the sensible suggestions part. A summation of the important thing factors of the “Stanley 10-817 25mm FatMax Xtreme snap-off knife” follows.
Conclusion
This exploration of the Stanley 10-817 25mm FatMax Xtreme snap-off knife has detailed its key options, encompassing blade segmentation, ergonomic deal with design, blade width issues, inherent sturdiness, the performance of its snap-off mechanism, its affiliation with the FatMax Xtreme collection, and the importance of its mannequin identification. It has established the instrument as a mix of sensible design parts meant to fulfill skilled wants, providing a steadiness between utility, security, and longevity.
In abstract, the Stanley 10-817 capabilities as a consultant of its instrument class, embodying design decisions tailor-made to maximise effectivity and stand up to demanding use instances. Its worth proposition rests in its capability to ship constant efficiency with acceptable dealing with. As instrument designs evolve, the ideas evident on this mannequin could proceed to tell future improvements. The consumer’s adherence to security tips and advisable practices stays paramount in realizing its meant advantages.